IKELITE UNDERWATER TTL HOUSING 200DLM/C FOR CANON EOS 250D REBEL SL3, EOS 200D MARK II, KISS X10

Capture striking underwater images with IKELITE UNDERWATER TTL HOUSING 200DLM/C FOR CANON EOS 250D REBEL SL3, EOS 200D MARK II, KISS X10 with TTL Circuitry, which ships with the DLM Dome Port for select lenses. It also accepts optional, interchangeable dome and flat ports for a broad array of other lenses. The enclosure features a depth rating of 200'. An Ikelite sync cord bulkhead and built-in TTL circuitry enable the connection of optional external strobes.

SPECIFICATIONS:

• 200 ft (60m) depth rating
• DLM Type C port mount
• Controls for all important camera functions; controls are not provided for Diopter Adjustment Knob, Display Button, Wi-Fi Button, Depth-of-field Preview Button, and Flash Button
• Ikelite flash bulkhead connector with built-in TTL circuitry
• Two 1/4-20 threaded tray mounts with 3" (76mm) spacing
• Slightly negative buoyancy in freshwater
• Actual buoyancy varies depending on the choice of lens and port
• 3 lbs (1.4 kg) not including port
• 5 x 5.9 x 6 in (191 x 150 x 152 mm)
• ABS-PC, acrylic, and acetyl construction

Construction Details

• Made by hand in the USA from a corrosion-resistant polycarbonate and ABS plastic blend
• White on the front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear in the back to allow you to monitor the O-ring seal and camera
• Two double-passivated, stainless steel locking latches are virtually unbreakable and make it easy to open and close the housing
• Rear O-ring seal design and placement prevent accidental twisting or stretching, and eliminate the need for a groove that can trap sand, dirt, or debris
• 1/2-20 threaded accessory port on the side of the housing allows for the easy installation of an optional Vacuum Kit, which will allow you to confirm the integrity of the watertight seal before diving
• The camera is installed and removed through the front of the housing
• The mounting plate allows for secure camera placement and does not need to be removed for you to access the battery compartment or memory card slot
• The mounting plate has a 1/4"-20 threaded hole for connection to a tripod

Controls and Handling

• Large, ergonomic, mechanical controls, including push-buttons, dials/knobs, and levers, afford access to all camera functions except for the diopter adjustment knob, display button, Wi-Fi button, depth-of-field preview, and flash button
• Laser-engraved control symbols on the back of the housing won't come off or fade with time
• The camera's LCD screen is fully visible from edge to edge through the rear of the housing
• Super eye Viewfinder gives you an enhanced view through the camera's OVF and can be replaced quickly and easily by the optional Straight or 45° Magnified Viewfinder

Lens Ports

• Ships with DLM Dome Port and zoom gear for Canon EF-S 18-55mm f/4-5.6 STM kit lens
• Durable Delrin acetal resin body is resistant to corrosion
• Housing accepts optional, interchangeable dome and flat ports for a broad array of other lenses

Strobe Connection and Operation

• Ikelite bulkhead with a hot shoe connection and built-in TTL circuitry enable the connection of optional external strobes via sync cords
• A circuit is powered by the strobe, so there are no batteries to change and there is no maintenance to be done
• Exposure compensation in TTL mode is supported using the camera's built-in control
• Ikelite DS strobes DS50 (above serial number 70000), DS51, DS125 (above serial number 5000), DS160, DS161, and DS200 (above serial number 7163) are operable in TTL or manual mode
• Third-party strobes and non-digital Ikelite strobes are not compatible